Archive for December, 2008
10 Ways to Ensure Good Air Quality
Posted by admin in Uncategorized on December 11th, 2008
2) ventilation, bathroom, kitchen, bathroom, laundry room and outdoor directly. Use of energy – efficient, quiet fan.
3) avoid finding furnace, air conditioning, ductwork in the parking lot or other space where they can get him into the house and pollution. What a house near the door from the garage to install automatic door. Applies to the edge of the door weatherstripping to reduce airborne pollution transport. If you have a garage damgwan or through other potentially contaminated space, this air pollution must pass in order to avoid entrainment damgwan seal.
4) byeoknanroya properly vented, wood stoves, fireplaces and other products, if possible, to the outdoor air intake for the product, use full munwa.
5) Let go of the air particle filter or air purifier – air out of the dust and ductwork of your heating and cooling system components on and off for processing. Need to maintain or replace regularly.
6) Clothes dryers and central vacuum cleaner vented directly outdoors.
Paint, solvent, cleaner, and 7) Store, volatile compounds, and pesticides out of the occupiable space off the air intake ventilation.
to minimize or even candles, cigarettes, indoor barbecues, decorative avoid unvented combustion devices, combustion sources, and ventilation – free heaters.
9) ASHRAE 62.2 outdoor air throughout the house as recommended by the amount of the minimum distribution, whole – house mechanical ventilation is used.
10) use of the house, including all space events and activities to accommodate the cleaning products and provides a window or other mechanical ventilation.
garden table and Chair
Posted by admin in Uncategorized on December 6th, 2008
The right to select garden furniture as it is important to select furniture inside.
Outdoor furniture can stand the outdoor conditions, how they move, so is sitting in a chair by the table a strong need to see the quality. If you think it is going to be out and about with you, the furniture store, and then select the material, such as metal, will last.
What style to choose
Plastic garden furniture low – Options and maintenance costs because it’s easy. Also, lightweight easy to lift and move it to another location ideal.
Made of aluminum and iron garden furniture is heavy wind, ideal for this position. It’s a very hardwearing can be left outside permanently. You can redefine a professional paint metal furniture. Before the picture, the bangcheong with wire wool once dry munji and the hole on the surface of the paint brush any loose dirt.
Wooden garden furniture and all the timeless style of modern and traditional garden will fit. Although durable, wooden furniture, it again – or re-stain – and you need the gas must be moved inside during the winter.
Rattan garden furniture garden and can easily move around a lightweight, but it can become damaged by the sun’s rays will bring a modern look.
How about the furniture in the garden
Teak is protected from the elements 51 is still looking for a new hardwood furniture. Before you begin, make sure it’s a great furniture and lightly sand – is dry and make sure saendeupeyipeo grade. ,, Smooth, and then apply rubbing oil on the grain by using a rag. You, you can add oil to coat one or more of the following, make sure to dry thoroughly before applying.
If you believe your age, how old is the furniture and the silvered case, using the original color of the wood restoration specialist can restore. Paint, the maximum leave for 15 minutes and wash off after work.
If you have a plastic garden furniture, just a splash of hot soapy water and bleach to wash it down with hands to remove dirt and stubborn stains. Nothing not to scratch, so abrasive sponge or mark the surface, rinse and dry thoroughly before the furniture.
Maximum gamunbinamu, wood, plastic, quickly running a brush over the surface of metal or fabric contains – all the strange nooks and crannies to get to the bristles, and get some loose dirt, dust, or remove the winter cobwebs that build.
-
-
You are currently browsing the archives for December, 2008
